Christie LX900 Uživatelský manuál stáhnout pdf (Strana 90)

10-2 LX900 RS232 Codes-Expanded Technical Reference Information

020-000034-01 Rev 1. (03/08)

10.2.2 When the command pipelining is needed

When it needs command pipelining, the operation is the same as the remote control as below:

• Sending-side system issues commands every 100ms 2) When receiving an applicable command, the

function is executed repeatedly for120ms.

• When receiving the same command in a row within 120ms, the function is repeatedly

executed for another 120ms from the moment of the second command reception.

• When there is no incoming command after 120ms, the execution of pipelining is stopped.

• When the projector receives other command within 120ms, the execution of pipelining is stopped.

10.3 Status Read Command with Address

10.3.1 Format

The PC issues a command in the format as below:

“A” Address “CR” Command [CR]

“A” Address “CR_” Command [CR]

Address: 3-digit number (“001” – “999”)

Command: string (Refer to Basic and Expand Serial Commands)

The only projectors that have the address matching with the one in the received data decode the command, and

it returns required data.

Required Data [CR]

Required Data: String (Refer to Basic Status Read Commands)

When the received data cannot be decoded, it returns “? “ [CR]

1 2 ... 85 86 87 88 89 90

Žádné komentáře

Christie LX900 Uživatelský manuál Strana 90